|
I use a 1/4 inch flat washer. Lay the body frame on the back – align perfectly and then mark using the washer as your guide. You will have about 1/8 inch overhang. |
|
To contact us: |
|
Email: dulcimersbyjeff@msn.com
|
|
Constructing the Body Part One |
|
Next, lay the body frame on the soundboard/fretboard. Using the 1/4 flat washer, mark the outline. IMPORTANT: make sure the Peghead brace is aligned with the fretboard and the back brace is centered on the fret board. |
|
Trim the soundboard/fretboard and back on the line you have drawn. We are ready to glue the body together. There will be an 1/8 inch or so overhang. That is good, we will trim that off after the glue dries. |
