Drill 1/4 inch holes at each of the four marked geared tuners positions. 

Email: dulcimersbyjeff@msn.com

 

Building the Peghead Step Three

We’re getting serious now!

Building A Jenny Wiley Dulcimer | Building the Peghead Step One | Building the Peghead Step Two | Building the Peghead Step Three | Building the Peghead Step Four | Pictures of Complete Peghead | Assembling the Body Part One | Assembling the Body Part Two | Installing Frets in Fret Board | Attach Fret Board to Sound Board

Allow the bit to drill complete through and about 1/8 deep on the bottom side of the Peghead.  The end of the tuner will rest in that indention for support.

Now drill 5/16 through the sides of the Peghead.  This is for the bushings.